There are lots of sharing protocols from which Gbox is the most known one. Nowadays CCcam server is more popular than Gbox. Even those who used Gbox do not share Gbox cards anymore and are eager to CCcam. There are other well known protocols like Newcamd and Nasscamd, but CCcam is the most popular.
For internet sharing you need a set which support one of these protocols. Furthermore ADSL is recommended. For example for CCcam you will need a Linux receiver or DVB card and it is not available on any set but 2. While Gbox is applicable to all sets it is more difficult to deal with. It has less stability than CCcam. The best quality of HD channels and SKY packages is achievable by CCcam. For internet sharing use ADSL otherwise videos will have lots of freeze.
As mentioned above, there are a lot of immolators like Gbox and CCcam. In my view these two are better than others though CCcam is the best.
Advantages of CCcam
۱-CCcam server protocol transports TCP code from Port so it is much better than Gbox and it is good for clients.
۲- According to client using invalid IP there is no need to valid IP in this protocol and they can use internet sharing easily. Notice that in CCcam there is no need to Valid IP or any other things. Just buy an account and enjoy internet sharing.
۳- There is no need for client to forward, so you can use usual modems for internet connecting and there is no need to buy a Port Forwarding modem.
۴- There is no need to computer in CCcam
۵- In CCcam server the received codes are much better than those in Gbox and sectional disconnection is much lesser.
۶- In CCcam there is no limitation for cards and there is no lack for packages.
-Pressing the red button you will receive IP and the receiver will connect to the internet.
-If you use adopter and wireless, connect it to receiver USB port and follow the manual:
Menu> Network> Wireless Setting> Search Access Point
Click on your wireless network and type the network password. If it is correct it will be connected to the network and you will see a check mark beside it.
Now follow this rout:
Menu> Network> Wireless Setting> IP Setting
By pressing red button IP will be received automatically. Then you can press the green button in order to make sure of internet connection. Till now receiver is connected to the internet successfully. Now it is time for CCcam setup and connecting to CCcam server. There are two ways for doing this.1- transporting adjustment through files 2- manual adjustment. Both ways will be explained.
۱- Transporting adjustment through files
First download the adjustment file. Since it is a zip file, first extract the file. Open the CCcam.cfg file in notepad. For this, first right click on file and click open, then click on “select program from a list” and click “ok”. Now choose the notepad from the list and click “ok”. In the file you should insert the CCcam username and password you purchased and save the file. Then send CCcam.cfg file to a flash memory and plug it in your receiver. Then go to menu, in expansion part go to USB and click on CCcam. Adjustment is done you can check the channel weather it is opened or not.
Press f1+111 and choose enable internet. Then press f1+666 to insert CCcam server accounts in lines. You can insert from 1 to 7 servers. For example you will choose server 1, click on NEWES cs and choose CCcam, then instead of 1 insert Host or IP. In the second part insert Port and at last in part 4 and 5 insert your user name and password and save it.
If the CCcam account that purchased is more than 1 line, insert the lines in server 2 to 7 in the same way
CCcam adjustment manual on StarMax100
CCcam adjustment tutorial on StarMax100
In order to adjust CCcam server , plug the modem cable in StarMax receiver.
Then by receiver remote control press the f1+000 and enable receiver’s patch.
Now by remote control press f1+111 and choose the enable internet choice.
Then go to the main menu, through “expansion” part, go to “server”.
Then in address bar, you should insert address and in TCP insert Port address, port number, username and password. In kind part you choose CCcam. In order to insert CCcam information in other pages you should change the number 1written before address to 2. After account adjustment save the information and restart the Istar receiver.
While using this Service we just receive the decoding ID that uses a little banwidth.
On which receivers, CCcam is applicable?
CCcam server is applicable on every receiver which has the ability to connect to the internet through LAN cable or wireless. More than 99% of new receivers offered in market have this ability. It is also applicable to all satellite cards (DVB).
CCcam adjustment manual on ProgDVB in order to use CCcam account
This tutorial is provided for the popular and powerful player ProgDVB and for other players it would be a bit different. Although the plugin used in all players is CCcam hadu plugin.
In order to adjust CCcam on ProgDVB or on satellite card, first you should download the Hadu plugin, then extract it and go to the player setup location. Here our player is ProgDVB. Go to the plugin folder. If the default program is installed in drive C, the folder address would be like: C: Program Files/ProgDVB/Plugins. While you are in the Plugins folder create a new folder and name it Hadu. Then drag the extracted plugin files (Hadu.dll and Hadu.ini files) in the Hadu folder.
In the next step double click on Hadu.ini file to open it. In the last part insert your account username and password in determined parts.
For example if the favored line be like:
cccam server : logiccam-ir.zapto.org:25000:0: USERNAME: PASSWORD
and your username is logiccam20 and your password is logiccampass20 you have to edit the line in this way:
After file edited, save it. Then run the ProgDVB (if it is open close it and run again). If the plugin is installed correctly, you can reach the interface plugin through plugin menu. If you do it correctly you will see the channel opens after a while.